2,00 € each

Electrolytes "KOH" Potassium Hydroxide

  • KOH 98% PURE (also called Caustic Potash)
  • The best electrolyte for generating HHO
  • Stays in your electrolyte tank as the water is used
  • High output of HHO Gas
  • 50g Satchel (for 1 liter @5%)
  • See article "HHO Electrolytes Explained" for instructions
2,00 € each

Electrolytes "NaOH" Sodium Hydroxide

  • NaOH 98% PURE (Also called Lye or caustic soda)
  • The second best electrolyte for generating HHO
  • NaOH is not consumed as water is used and remains in the electrolyte tank
  • High production of HHO Gas
  • 50g Satchel (for 1 liter @5%)
  • See article "HHO Electrolytes Explained" for instructions.
5,00 € each

Stainless Steel Passivation "Citric Acid"

2,50 € each

Nylon Tubing Reinforced

  • Food Grade tubing, safe to use with any electrolyte.
  • Difficult to kink so electrolyte has continuous flow.
  • Stands up to the high temeratures under your hood.
  • ID 3/8"
  • Sold per meter
2,20 € each

Tefen Fittings Straight BSPT Barbed

  • Tefen Straight 1/8'' BSPT, 3/8" (8mm) Barbed
2,50 € each

Tefen Fittings Elbow BSPT Barbed

  • Tefen Elbow 1/8'' BSPT, 3/8" (8mm) Barbed
3,90 € each

24,00 € each

HHO Safety Valve “Piston Popper”

HHO safety valve protects your vehicle from the unlikely occurrence of a flame emerging from the engine air intake. The safety valve is spring loaded and designed to temporarily open when a flashback causes extreme pressure.

  • Automatically resets
35,00 € each

HHO Electrolyte Tank - Heavy Duty

  • HHO Electrolyte Tank - Reservoir capacity 1 liter
  • Heavy Duty - polyethylene material over 2mm thick
  • Antipressure relief valve to protect against calopse
  • Mounting bracket made of stainless steel
  • Fluid sensor for detecting the level of electrolyte (optional)
25,00 € each

HHO Bubbler Tank - Heavy Duty

  • HHO Bubbler Tank - Reservoir capacity 1 liter
  • Heavy Duty - polyethylene material over 2mm thick
  • Cap designed to "blow thru" for protection against Flashback
  • Mounting bracket made of stainless steel
Free

HHO Tandem - Electrolyte and Bubbler Tank - Heavy Duty

  • HHO electrolyte and bubbler tank - Reservoir capacity 1 liter each
  • Tandem configuration with electrolyte tank and bubbler tank together
  • Heavy duty polyethylene material over 2mm thick
  • Antipressure relief valve to protect against calopse
  • The bubbling tank cap is designed to "blow thru" for protection against Flashback
  • Mounting bracket made of stainless steel
  • Fluid sensor for detecting the level of electrolyte (optional)
25,00 € each

Main Water Storage Tank

This fresh distilled water tank automatically recharges the electrolyte reservoir to keep it full. The pump is driven by the PWM and responds to requests for water to fill the electrolyte reservoir, which effectively extends the water capacity of the system.

  • Main water storage tank - Reservoir capacity 1 liter
  • With built in pump
  • Mounting bracket made of stainless steel
  • Automatically fills electrolyte tank
  • You need a liquid level sensor or a float switch for automatic recharging
  • PWM required for pump control
33,00 € each

HHO Circulating Micro Pump 4L/min (12 Volts)

A pump is needed if there is not at least 20cm height difference between the bottom of your Electrolyte tank and the top of your HHO Dry Cell also it greatly increases the output of any dry cell as opposed to gravity run systems.

  • Output 4L/min - 3.5m head
  • Can be slowed down by regulating the input power, down to even 6 volts
  • 10mm inlet & 8mm outlet (use 3/8" tubing on both sides)
  • Extremely compact construction
  • Stainless Steel mounting Bracket included
39,00 € each

HHO Circulating Micro Pump 4L/min (24 Volts)

A pump is needed if there is not at least 20cm height difference between the bottom of your Electrolyte tank and the top of your HHO Dry Cell also it greatly increases the output of any dry cell as opposed to gravity run systems.

  • Output 4L/min - 3.5m head
  • Can be slowed down by regulating the input power
  • 10mm inlet & 8mm outlet (use 3/8" tubing on both sides)
  • Extremely compact construction
  • Stainless Steel mounting Bracket included
18,00 € each

Universal Multi Adjustable Dry Cell Swivel Bracket

  • Designed to support all our HHO Dry Cell generators
  • Mounts onto the rear of the HHO Generator
  • Stainless Steel
  • Sold in pairs... 4 pieces and the bolts
22,00 € each

4 Pronged Probe for Fluid Level Sensing

When combined with our HHO Specific PWM allows the Electrolyte Level to be viewed by the driver, and provides additional safety through automatic PWM shutdown when levels are too high or too low.

  • 4 Customizable electrolyte levels
  • Designed specifically to work with our Electrolyte Tanks / Reservoirs but can easily be adapted to other tanks.
4,80 € each
No stock

Resettable Circuit Breaker 30 Amps

 This circuit breaker is good for 30 amps and you can double up on them if you want 60 amps

  • Resettable
  • Protects vehicles battery from electrical shorts
Results 1 - 17 of 17