1,00 € each

Electrolyte "KOH" Potassium Hydroxide

  • KOH 98% PURE (Also Called Caustic Potash)
  • The best electrolyte you can use with HHO
  • Stays in your electrolyte tank as the water is used.
  • High output of HHO Gas
  • 50 Grams Satchel

Read article: HHO Electrolytes Explained

1,00 € each

Electrolyte "NaOH" Sodium Hydroxide

  • NaOH 98% PURE (Also called Lye or caustic soda)
  • The 2nd best electrolyte you can use with HHO
  • Stays in your electrolyte tank as the water is used.
  • High output of HHO Gas
  • 50 Grams Satchel

Read article: HHO Electrolytes Explained

2,00 € each

Citric Acid

  • Citric Acid is (2-hydroxypropane-1,2,3-tricarboxylic acid)
  • Great for Passivating any Stainless Steel you have.

Read article: How to Passivate Stainless Steel

2,00 € each

Nylon Tubing Reinforced

  • Food Grade tubing, safe to use with any electrolyte.
  • Difficult to kink so electrolyte has continuous flow.
  • Stands up to the high temeratures under you hood.
  • Sold per meter
  • ID 8mm - OD 13mm
  • ID 10mm - OD 15mm
  • ID 12mm - OD 17mm

Click the choose options button to select quantity.

1,80 € each

Tefen Fittings Straight BSPT Barbed

Tefen Straight 1/8'' BSPT 8mm barbed

Tefen Straight 1/4'' BSPT 10mm barbed

Tefen Straight 1/4'' BSPT 12mm barbed

1,80 € each

Tefen Fittings Elbow BSPT Barbed

Tefen Elbow 1/8'' BSPT 8mm barbed

Tefen Elbow 1/4'' BSPT 10mm barbed

Tefen Elbow 1/4'' BSPT 12mm barbed

3,00 € each

Medium Gauge Multi Stranded Copper Wire

  • 6mm² = 9 – 10 AWG
  • SOLD PER METER
4,50 € each

Heavy Gauge Multi Stranded Copper Wire

  • 10mm² = 7 AWG
  • SOLD PER METER
18,00 € each

HHO Safety Valve “Piston Popper”

This HHO Safety Valve Flashback Arrestor is installed on your HHO Bubbler and will relieve any pressure in case of Flashback from your vehicles air intake.

33,00 € each

HHO Electrolyte Tank - Reservoir, Heavy duty

  • HHO Electrolyte Tank - Reservoir 1 Liter capacity
  • Heavy duty, more than 2mm thick polyethelene material
  • Anti tank collapse relief, one way ball valve
  • Stainless Steel mounting Bracket

*Auto-hydrogen's HHO Specific PWM is needed if the 4 pronged probe is to show fluid levels of your Electrolyte tank.

16,00 € each

HHO Bubbler Tank - Reservoir Heavy duty

  • HHO Bubbler Tank - Reservoir
  • Heavy duty, more than 2mm thick polyethelene material
  • Cap designed to *blow thru for Flashback protection
  • Stainless Steel mounting Bracket

*Blow thru means the centre of the cap is weaker and breaks away in case of a flash back.

43,00 € each

HHO Tandem Electrolyte Tank & Bubbler Tank / Reservoirs

  • HHO Electrolyte Tank & Bubbler Tank / Reservoirs, 1 liter capacity each
  • This is a tandem setup with electrolyte tank and bubbler tank together
  • Heavy duty, more than 2mm thick polyethelene material
  • Anti tank collapse relief, one way ball valve
  • Cap on bubbler tank is designed to *blow thru for Flashback protection
  • Stainless Steel mounting Bracket

*Blow thru means the centre of the cap is weaker and breaks away in case of a flash back.

*Auto-hydrogen's HHO Specific PWM is needed if the 4 pronged probe is to show fluid levels of your Electrolyte tank.

16,00 € each

Main Water Storage Tank / Reservoir

This tank resevoir is used to fill your electrolyte tank automatically and is controled by our HHO Specific Pwm Unit.

  • Main Water Storage Tank / Reservoir, Heavy Duty
  • 1 Liter capacity
  • With built in pump
  • Mounting bracket included
  • Used to auto refill the Electrolyte tank
  • Needs a fluid level sensor or a float switch for automatic refilling
  • Only works if you have the autohydrogen PWM with regulating functions
29,00 € each

HHO Circulating Micro Pump 4 L / Min (12Volts)

A pump is needed if there is not at least 20cm height difference between the bottom of your Electrolyte tank and the top of your HHO Dry Cell also it greatly increases the output of any dry cell as opposed to gravity run systems.

  • Output 4L/min - 3.5m head
  • Can be slowed down by regulating the imput power, down to even 6 volts
  • 10mm inlet & 8mm outlet
  • Extremely compact construction
  • Mounting bracket supplied
35,00 € each

HHO Circulating Micro Pump 4 L / Min (24Volts)

A pump is needed if there is not at least 20cm height difference between the bottom of your Electrolyte tank and the top of your HHO Dry Cell also it greatly increases the output of any dry cell as opposed to gravity run systems.

  • Output 4L/min - 3.5m head
  • Can be slowed down by regulating the imput power
  • 10mm inlet & 8mm outlet
  • Extremely compact construction
  • Mounting bracket supplied
36,00 € each
No stock

HHO Circulating Micro Pump 6 L/Min, 12Volts

DISCONTINUED

A pump is needed if there is not at least 20cm height difference between the bottom of your Electrolyte tank and the top of your HHO Dry Cell also it greatly increases the output of any dry cell as opposed to gravity run systems.

  • Output 6L/min - 5m head
  • Can be slowed down by regulating power down to even 6 volts
  • 10mm inlet & 10mm outlet
  • Compact construction
  • Mounting bracket supplied (mounted on pump)

Watch the Video of this Product Working

9,99 € each

Universal Multi Adjustable Swiveling Bracket

  • Designed to support all our HHO Dry Cell generators
  • Mounts onto the rear of the HHOGenerator
  • sold in pairs... 4 pieces and the bolts
12,99 € each

4 Pronged Probe for Fluid Level Sensing

Designed to work with our Tanks / Reservoirs' but can be adapted easily to other tanks

6,00 € each
No stock

Circuit Breaker 30amps

This circuit breaker is good for 30amps and you can double up on them if you want 60amps

0,35 € each

Hex Bolts/Allen Bolts "6mm" Stainless Steel

Listed bellow are the "6mm Hex/Allen bolt" range we carry.

Each Bolt is supplied with 1 lock nut and 2 washers.

Click "Choose options" to select Length & Quantity.

  • 6mm x 20mm
  • 6mm x 30mm
  • 6mm x 40mm
  • 6mm x 50mm
  • 6mm x 60mm
  • 6mm x 70mm
  • 6mm x 80mm
  • 6mm x 90mm
  • 6mm x 100mm
  • 6mm x 110mm
  • 6mm x 120mm
  • 6mm x 130mm
  • 6mm x 140mm
  • 6mm x 150mm
Results 1 - 20 of 20